Click image to view full size image
Production introduce
Butterfly valves are designed to comply with MSS SP-67, BS5155 and API609.Compatible with GB, ANSI, DIN, BS, JIS flanges. Available in size 2"to 40". Available in wafer type, lug type and U-section wafer type body. Available with handles (2" to 8"), manual gear operators 2" to 40"), and electric or pneumatic actuators (2" to 40"). With many body/trim combinations, there is a series F101 butterfly valve to meet your application.
Feature:
1. Excellent control characteristics.
2. Tight shut-off even after innumerable operations.
3. 90° movement for full open/close position. Provision for intermediatory locking after every 10° for regulation/ controlling purpose.
4. Installation cost considerably reduced because of very low weight and compact design.
5. No routine maintenance required.
6. Longer life and reliable service with minimum component wear.
7. Renewable seats. No supplementary gasket required with the adjacent pipework.
8. Body & Stem totally protected from service fluid.
9. Centrally mounted disc, shafts and bearings, therefore these valves give higher CV values.
| Materials List | ||
| Item | Part Name | Materials |
| 1 | Body | Cast Iron: ASTM A126CL. B , DIN1691 GG25, EN 1561 EN-GJL-200, GB12226 HT200; Ductile Cast Iron: ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15, GB12227 QT450-10; Stainless Steel: ASTM A351 CF8, CF8M, CF3, CF3M; Carbon Steel: ASTM A216 WCB |
| 2 | Stem | Zinc Plated Steel; Stainless Steel: ASTM A276 Type 316, Type 410, Type 420, ASTM A582 Type 416; |
| 3 | Taper Pin | Stainless Steel: ASTM A276 Type 304, Type 316, EN 1.4501; |
| 4 | Seat | NBR, EPDM, Neoprene, PTFE, Viton; |
| 5 | Disc | Ductile Cast Iron (Nickel plated): ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15, GB12227 QT450-10; Stainless Steel: ASTM A351 CF8, CF8M, CF3, CF3M, EN 1.4408, 1.4469; 1.4501; AL-Bronze: ASTM B148 C95400; |
| 6 | O-Ring | NBR, EPDM, Neoprene, Viton; |
| 7 | Bushing | PTFE, Nylon, Lubricated Bronze; |
| 8 | Key | Carbon Steel |
| This buyer can select material as per materials list. The customer may mark the material and temperature used, Our company may select instead. When the medium and temperature is special, please consult with our company. | ||
| Seat Temperature Ratings | |||||||
| Material | NBR | Neoprene | EPDM | Hypalon | Viton | PTFE | |
| Temperature Ratings | °C | -20~100 | -40~100 | -40~120 | -32~135 | -12~230 | -50~200 |
| °F | -4~212 | -40~212 | -40~248 | -25.6~275 | 10.4~446 | -58~392 | |
| Seat materials are capable of withstanding lower temperatures without damage. However, the elastomer becomes hard and torques increase. Some flow media may further restrict the published temperature limits or significantly reduce seat life. | |||||||
cast iron handle lever operated wafer concentric butterfly valve
